Step-by-Step Tear Down Tutorial: Razer Blade Stealth 2019 RZ09-0310

In this Tutorial we will show you how to completely Tear down the Razer Blade Stealth 13 2019

A Beginner’s Guide to Disassembling the Razer Blade Stealth 2019 Model

Are you curious about the inner workings of your Razer Blade Stealth 2019 Model (RZ09-0310) but intimidated by the idea of disassembling it? Fear not! In this beginner’s guide, we’ll walk you through each step of the process, making it easy for non-techies to explore the components inside their device. Let’s dive in!

Step 1:

Getting Started To begin the disassembly, ensure you have the necessary tools. You’ll need a T5 Torx head screwdriver, which can be easily obtained from our website at It’s always a good idea to have a clean and organized workspace. Start by unfastening the ten screws located around the perimeter and top of the unit using the T5 Torx head screwdriver. Carefully lift off the bottom cover, exposing the inner components of your Razer Blade Stealth.

Step 2:

Inside the device, locate the battery connector on the left-hand side of the motherboard. Gently unlatch the connector and remove the six screws holding the battery in place. Lift the battery out of the device with caution. Identify the screw that secures the M.2 SSD in place. Unscrew it and slide the drive out of its slot. This component is responsible for storage in your laptop.

Step 3:

Identify the screw that secures the M.2 SSD in place. Unscrew it and slide the drive out of its slot. This component is responsible for storage in your laptop. Unplug the Wi-Fi antennas connected to the Wi-Fi card. Then, unscrew the Wi-Fi card and carefully slide it out of its slot. The Wi-Fi card enables wireless connectivity on your device.

Step 4:

Unplug the webcam and microphone connector from the motherboard on the left side. Untangle the Wi-Fi cables from the unit on the right side, ensuring they are free from any obstructions. Underneath a tape cover, you’ll find the LCD connector. Carefully unlatch it and dislodge it from the body of the unit. This connector is responsible for the display on your laptop.

Step 7: Optional Bios Speaker Removal

If desired, you can remove the BIOS speaker. Simply unplug the wire connected to the speaker and lift it up.

Step 9:

Unscrew the six screws on either side of the unit to remove the covers. This step allows access to additional components within the device.

Step 10:

Unfasten the five screws that secure the CPU and GPU cooling fans, as well as the motherboard. Ensure you unplug the cooling fans from the motherboard on both sides of the unit. Gently lift the motherboard out, ensuring the fans do not get stuck on the board. Remove the remaining cooling fans from the device. Remove the four screws that hold the motherboard in place. This step prepares the motherboard for removal. On the bottom side of the motherboard, you’ll find ribbon cables. To unplug them, lift up on the retention bar and gently pull the cables out of their connectors. Exercise caution to avoid damaging the cables.

Step 11:

Unscrew the six screws that hold the lcd to the top case located at the top of the unit. Open the unit as you would normally, the hinges will separate from the top case after the unit is about 15 degrees past 90 degrees.

Congratulations! You have successfully completed the disassembly of your Razer Blade Stealth 2019 Model (RZ09-0310). By following the step-by-step guide provided in this beginner’s tutorial, you gained a deeper understanding of the internal components of your laptop. Exploring the intricate inner workings of your device can be a fascinating and educational experience.

Remember, disassembling your laptop should be done with caution and only if necessary. If you’re not confident in your technical skills or unsure about any step, it’s always best to seek professional assistance or refrain from proceeding further. Mishandling the components can cause damage to your device and void the warranty.

We hope this tutorial empowered you to delve into the world of laptop disassembly and gave you valuable insights into the different components that make your Razer Blade Stealth function. Whether you were simply curious or needed to replace a specific part, understanding the internal structure of your device is a rewarding endeavor.

If you have any further questions, suggestions, or want to share your experience, we encourage you to leave a comment below. We greatly appreciate your support and thank you for joining us in this tear-down journey. Stay tuned for more TekDep tutorials and guides to enhance your knowledge and DIY skills!

Disclaimer: Disassembling your laptop may void the warranty and should only be done if you are confident in your abilities. Always exercise caution and perform any modifications or repairs at your own risk.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.