Description
A1989 Bottom Case Screw Set Space Gray for 2019/2020 Apple MacBook Pro 13”
CONDITION:
Used OEM 100% Original Apple Screw Set. Tested. Fully Functional.
Tested Using The Latest Industry Standard Hardware Diagnostic Methods.
Professionally Removed From A1989 MacBook Pro Unit.
Tested Using The Latest Industry Standard Hardware Diagnostic Methods.
Professionally Removed From A1989 MacBook Pro Unit.
INCLUDES:
Complete Bottom Case Screw Set (Space Gray) x6 ONLY
COMPATIBILITY:
2018 2019 MacBook Pro 13″ (Touch Bar) A1989
2020 MacBook Pro 13″ (Touch Bar) A2251
While you’re here, consider pairing your purchase with one of our repair tool kits!
130 in 1 Professional Multi Bit Screwdriver Precision Tools Set For All Gadgets
Check out more of our Repair Tools
Required Tools For Apple 13″ MacBook Pro, A1989, A2251 Family Repairs:
Note: Before you begin, make sure to drain you laptop battery completely by keeping it on till it dies. Then, unplug your power adapter, and disconnect the battery before performing any repair and always wear safety glasses & anti-static nitrile gloves.
- Pentalobe screwdriver (P5): The bottom case uses a proprietary type of screw called a Pentalobe screw. This type of speciality screwdriver is required in removing the bottom case and begin the repair.
- Torx screwdriver (T3 T4 ): Speciality Torx bits are needed to remove the screws that hold the MacBook Pro a1989 components such as the Battery connector T5, Trackpad Cable T3, Trackpad T4, Logic Board T3 & T4
- Torx screwdriver (T1): Holds the wifi Module that has 16x T1 Tiny screws
- Torx screwdriver (T8): Total of 6X T8 Torx screws holds the LCD Assembly Hinges in place, All needs to remove along with wifi module before you can remove and replace the LCD assembly on the A1989.
- Wide Prying Tool : This tool can help you separate the battery from the MacBook Pro chassis TopCase, Battery in A1989 Is being hold in place using adhesive.
- Spudger: A spudger is a tool that helps you pry apart parts of the MacBook Pro without damaging them, you’ll need a spudger to disconnect the various cables and connectors inside the 13″ MacBook Pro A1989.
- Tweezers: Some of the connectors inside the MacBook Pro A1989 are very small, you’ll need a pair of tweezers to disconnect and reconnect them
TECHNICAL SPECIFICATIONS:
- MacBook Pro (13-inch, 2018/2019 A1989) – Technical Specifications
- MacBook Pro (13-inch, 2020 A2251) – Technical Specifications
Reddit 
