ASUS ROG GU603HE Repair Guide & Disassembly – Step-by-Step Breakdown

---

OVERVIEW:

In this in-depth repair guide, we walk through the complete disassembly of the ROG Asus Zephyrus M16 gaming laptop. This powerful device is equipped with an 11th Gen Intel i7 processor, 16GB of RAM, a 512GB SSD, and an RTX 3050 Ti graphics card. Whether you’re looking to replace the battery, upgrade the RAM or SSD, or simply clean the fans, this tutorial covers it all. We break down each step to ensure you can follow along confidently.

---

REPAIR TIME & SKILL LEVEL:

This repair is estimated to take about 2 TO 3 HOURS to complete and is of ADVANCED difficulty, requiring careful handling of delicate components and full system disassembly.

---

STEPS:

Tools You Need

For this repair, you will need a flathead screwdriver to remove rubber screw covers, a Phillips screwdriver for internal screws, a plastic pry tool to detach internal connectors and adhesive components, and possibly compressed air to clean fan assemblies during the process.

---

Remove Rubber Screw Covers

• Use a flathead screwdriver to gently pry off the rubber covers on the bottom plate.
• Insert the screwdriver between the rubber and chassis to avoid tearing the rubber.
• Set the rubber caps aside safely for reassembly.

---

Unscrew the Bottom Panel

• Remove all 13 screws from the bottom casing using a Phillips screwdriver.
• Note that edge screws are slightly longer with a neck.
• The three screws hidden under the rubber covers are last to be removed.

---

Detach the Bottom Plate

• Start prying from one corner using a plastic tool to release the internal pins.
• Slide the tool along the perimeter to pop all the clips.
• Carefully lift off the bottom plate and set it aside.

---

Disconnect the Battery

• Locate the metal battery lock tab and slide it sideways to expose the battery connector.
• Disconnect the battery cable from the motherboard by gently pulling it out.
• This step ensures safety during the repair.

---

Remove the Battery

• Unscrew the four screws securing the battery to the frame.
• Lift the battery out; there is no adhesive underneath, so it comes out easily.
• Set it aside if you plan to replace it later.

---

Unscrew Display Hinges

• Remove three screws from each hinge that hold the screen in place.
• Proceed slowly as these screws anchor the screen and its cables.

---

Peel Tape from Display Cables

• Peel away the strong adhesive tape covering both screen ribbon cables.
• Use fingers or a tool to carefully lift the plastic flaps over the connectors.

---

Disconnect Display Cables

• Gently pull the ribbon cables straight back from their sockets.
• Do not force them — they should slide out cleanly once flaps are lifted.
• Repeat for both sides of the screen.

---

Remove Screen Assembly

• Slide out the display assembly by lifting and maneuvering around the hinge hooks.
• Set the display off to the side to expose more of the motherboard.

---

Remove Touchpad Button Cover

• Pry up the plastic panel near the touchpad and keyboard.
• It lifts out without screws and exposes internal components underneath.

---

Remove Speaker Assemblies

• Unhook both speakers from their mounts; they are held in place without screws.
• Disconnect the combined speaker cable from the motherboard.
• Wiggle gently if it feels tight; avoid pulling hard.

---

Expel the SSD

• Unscrew the single M.2 screw securing the SSD.
• Slide the SSD out of its socket carefully.
• Note the second M.2 slot nearby for possible upgrades.

---

Unscrew the Heatsink Assembly

• Begin removing the numerous screws securing the heatsinks over the CPU and GPU.
• Note the sticker covering one of the screws — peel it back or screw through it.
• Remove all screws across the fan and heatsink plates.

---

Remove Heatsink and Fan Assembly

• Carefully lift the full assembly out.
• Watch for dust buildup — these fans collect debris easily due to high airflow.
• Blow out the dust if needed before reassembly.

---

Remove Dual Fans

• The fans are already unscrewed as part of the heatsink removal.
• Disconnect the fan cables from the motherboard.
• Pull them straight out with moderate force.

---

Remove RAM Stick

• Lift the black plastic RAM cover to reveal the module.
• Pull the side metal clips outward — the RAM stick pops up.
• Slide it out; only one stick is removable (the other 8GB is soldered).

---

Disconnect the Remaining Ribbon Cables

• Identify all remaining ribbon connectors for the keyboard and touchpad.
• Lift each locking flap and slide out the cable.
• Repeat for multiple small and large connectors along the frame.

---

Get rid of the Motherboard

• Unscrew the motherboard mounting screws.
• Carefully lift the board out of the frame.
• Check that all connectors and cables are free to prevent tearing.

---

Expel Additional Components

• Pop off any small secondary boards (like the power connector or audio jack).
• Use a plastic tool to disconnect any parts attached to the frame.

---

Remove the Mouse Pad

• Flip over the chassis and remove the final three screws securing the touchpad.
• Lift the pad out from below once screws and cable are disconnected.

---

Take away the Power Button Board

• The power button board is already unscrewed.
• Push it gently from below and pull it out from the top.

---

Take out the Keyboard Assembly

• Peel off the black keyboard cover — it’s held with strips of tape and minor adhesive.
• Unscrew all tiny keyboard screws arranged diagonally in an X pattern.
• Flip over the chassis and lift the keyboard out.

---

CONCLUSION:

Disassembling the ROG Zephyrus M16 is a meticulous but rewarding process. With careful handling, you can replace nearly every component from the battery to the motherboard. The layout is compact and designed for performance, so reassembly must be done with attention to cable routing and screw placement. Whether you’re upgrading storage or replacing a keyboard, this teardown provides a full roadmap to follow.

---

VIDEO TUTORIAL:

Looking for a more in-depth tutorial? Check out our complete teardown video for a detailed step-by-step walkthrough.

---

MAIL-IN REPAIR SERVICE:

We offer professional screen replacement services. If you’re unsure about doing this repair yourself, send your device to our expert technicians for fast and reliable repair.

https://tekdep.com/device-repair

---

SHOP PARTS:

---

SHOP TOOLS:

Using precision tools ensures a safe and efficient repair. Always use the right tools to prevent damage to delicate components. Avoid makeshift solutions and invest in quality screwdrivers and pry tools designed for electronics. This makes your repair experience smoother and much less risky.

---

HAVE QUESTIONS?

We’re here to help! Contact us:

• Phone: 818-456-4479
• Email: [email protected]

---

YOUR EXPERIENCE MATTERS: