A1369 Logic Board 820-2838-A – Core 2 1.86GHz for Apple 13″ Macbook Air Late 2010

Detail

A1369 Logic Board 820-2838-A – Core-2 1.86GHz for Apple 13″ Macbook Air Late 2010

Tutorial:

Watch How To Disassemble Apple MacBook Pro 13 inch Unibody A1369 A1466 <!–a>

Required Tools For Apple 13″ MacBook Air, A1369 Family Repairs:

Note: Before you begin, make sure to drain your laptop battery completely by keeping it on till it dies. Then, unplug your power adapter, and disconnect the battery before performing any repair and always wear safety glasses & anti-static nitrile gloves.

1. Pentalobe screwdriver (P5): The bottom case uses a proprietary type of screw called a Pentalobe screw. This type of speciality screwdriver is required in removing the bottom case and begin the repair.
2. Torx screwdriver (T4, T5): Speciality Torx bits are needed to remove the screws that hold the MacBook components such as the I/O Board, MagSafe, Audio Board, fans, trackpad, Battery and more.
3. Torx screwdriver (T8):  A T8 Torx screwdriver is also needed to remove the screws that hold the LCD Hinges in place, this is needed to remove and replace the LCD assembly on the MacBook Air.
4. Spudger: A spudger is a tool that helps you pry apart parts of the MacBook Air without damaging them, you’ll need a spudger to disconnect the various cables and connectors inside the MacBook Air.
5. Tweezers: Some of the connectors inside the MacBook Air are very small, you’ll need a pair of tweezers to disconnect and reconnect them.

Note:  Disassembling a MacBook Air can be challenging, it’s important to be very careful to avoid damaging the delicate components inside. If you’re not comfortable performing this type of repair, it’s best to take your MacBook Air to a professional.