ASUS Zephyrus M16 16″ (2021) GU603HE LCD Replacement – Step-by-Step Guide

---

OVERVIEW:

In this detailed repair guide, we will walk you through the process of replacing the screen on an Asus Zephyrus M16. This laptop was sent in with a nonfunctional display, and we’ll demonstrate the complete screen replacement step by step. By carefully following this tutorial, you’ll be able to safely disassemble the device, remove the damaged screen, and install a new OEM display. This guide is ideal for anyone experiencing screen issues on their Asus Zephyrus M16. Make sure to follow each step thoroughly for a successful repair.

See the official ASUS Zephyrus specs for this model

---

REPAIR TIME & SKILL LEVEL:

This repair is estimated to take about 2 to 3 hours to complete and is of INTERMEDIATE difficulty, requiring basic knowledge of laptop disassembly and careful handling of delicate components.

---

STEPS:

Tools You Need

For this repair, you will need a Phillips screwdriver, a flathead screwdriver (or any thin tool), a plastic spudger, a plastic card for safe removal of parts, and isopropyl alcohol to loosen any adhesive.

---

Remove Bottom Case Screws

• Flip the laptop over and start by removing all the visible screws from the bottom frame.
• Locate the three hidden screws underneath rubber covers near the hinge area and carefully pry the covers off with a flathead screwdriver.
• Unscrew the hidden screws to fully detach the bottom panel.

---

Remove Bottom Cover

• Start prying from one corner using a plastic pry tool or similar tool to pop the bottom case open.
• Carefully work your way around the sides, avoiding the hinge area, and release the plastic clips.
• Gently lift the cover as it begins to separate from the frame.

---

Disconnect the Battery

• Locate the battery connector on the motherboard.
• Slide the small metal cover forward and carefully disconnect the white connector by pulling it straight out.
• Fold the cable slightly aside to prevent accidental reconnection during the repair.

---

Unscrew the Screen Hinges

• Locate three screws on each hinge—left and right.
• Unscrew all six hinge screws to loosen the screen assembly from the frame.
• Carefully tilt the screen forward to access internal cable connections.

---

Disconnect Wi-Fi Antenna Cables

• Locate the network card where the Wi-Fi and Bluetooth antenna cables connect.
• Peel back the adhesive securing the cables and carefully disconnect the two antenna connectors.
• Set the cables aside for reinstallation later.

---

Disconnect Display Cable

• Find the main display cable secured with adhesive near the hinge area.
• Remove the adhesive and gently lift the plastic pull tab.
• Pull the connector straight back to fully detach it from the motherboard.

---

Release Cables from Cable Management

• Gently unhook the cables from the small plastic guide near the hinge.
• Take care not to force the cables out to avoid damage.

---

Raise the Screen Hinges

• Flip the laptop over and open the lid slightly to raise the hinges.
• Carefully lift the hinges manually to create space for removing the screen.
• Ensure all cables are free and not snagged in the hinge area.

---

Remove the Broken Screen

• With the hinges open, carefully lift the screen assembly upward.
• Guide the antenna cables and display cable through the frame channels as you remove the screen.
• Set the broken screen aside.

---

Prepare New Screen

• Use an OEM Asus replacement screen with matching specifications (2560×1600 100Hz display).
• Align the screen base with the hinge slots for proper fitment.

---

Install the New Screen into the Hinges

• Slide the screen into the hinge slots carefully.
• Manually close the hinges slightly to secure the screen’s position.
• Install one screw into each hinge temporarily to hold the screen in place.

---

Reconnect Display Cable

• Align the display connector with the motherboard port.
• Slide it straight in using the plastic pull tab for grip.
• Press down firmly to secure it and remove any remaining adhesive residue.

---

Reconnect Wi-Fi Antenna Cables

• Route the two antenna cables back through their designated channels.
• Match the white cable to the white triangle and the black cable to the black triangle on the network card.
• Snap each connector down until it clicks into place.

---

Secure Screen Hinges

• Tighten the remaining hinge screws on both sides to fully secure the screen.
• Make sure the hinges are flush with the frame and properly aligned.

---

Reconnect the Battery

• Place the battery connector back onto the motherboard.
• Slide the metal locking cover back into place to secure the connection.
• Double-check that the battery is firmly connected.

---

Reinstall Bottom Case

• Align the bottom case with the laptop body, ensuring all sides are seated properly.
• Press down around the edges until the clips snap back into place.
• Confirm that the panel sits flush with the chassis.

---

Reinstall Bottom Screws

• Reinsert all screws, including the three hidden ones under the rubber covers.
• Replace the rubber covers to conceal the hidden screws neatly.
• Tighten all screws securely to complete reassembly.

---

Power On and Test the New Screen

• Connect the charger and power on the laptop.
• Verify that the new screen turns on, displays correctly, and has no issues.
• Confirm full functionality before completing the repair.

---

CONCLUSION:

Replacing the screen on the Asus Zephyrus M16 is a detailed but manageable process when following this guide carefully. Ensuring the battery is disconnected during the repair is critical for safety. By systematically removing the hinges, cables, and damaged screen, and properly installing the replacement, you can restore your laptop’s display functionality. Testing the device before final screw installation ensures everything is working correctly. If followed properly, this guide will help you complete the repair successfully.

---

VIDEO TUTORIAL:

Looking for a more in-depth tutorial? Check out our complete teardown video for a detailed step-by-step walkthrough.

---

MAIL-IN REPAIR SERVICE:

We offer professional screen replacement services. If you’re unsure about doing this repair yourself, send your device to our expert technicians for fast and reliable repair.

https://tekdep.com/device-repair/

---

SHOP PARTS:

---

SHOP TOOLS:

Using precision tools ensures a safe and efficient repair. Always use the right tools to prevent damage to delicate components. Make sure to have a Phillips screwdriver, a flathead tool, and a spudger for safe disassembly.

---

HAVE QUESTIONS?

We’re here to help! Contact us:

• Phone: 818-456-4479
• Email: [email protected]

---

YOUR EXPERIENCE MATTERS: