ASUS ROG Zephyrus GA502D Hinge Cover Replacement – Step-by-Step Guide

---

OVERVIEW:

In this repair tutorial, we’ll be replacing a broken LCD hinge on the Asus ROG Zephyrus GA502D (2019 model). This step-by-step guide walks you through safely disassembling the device, accessing the hinge assembly, and securing the new hinge cover. You’ll learn how to remove the bottom case, disconnect internal components, and properly realign everything during reassembly. This repair is essential for maintaining the structural integrity of the screen and preventing further damage. Follow along for a detailed and clear walkthrough of the entire process.

See the official ASUS specs for the ROG Zephyrus GA502D

---

REPAIR TIME & SKILL LEVEL:

This repair is estimated to take about 1 to 1.5 HOURS to complete and is of INTERMEDIATE difficulty, requiring careful handling of delicate components and precise reassembly.

---

STEPS:

Tools You Need

For this repair, you will need a Phillips screwdriver, a plastic pry tool to open the case, and optionally, tweezers or pliers to remove damaged screws from broken standoffs.

---

Remove the Bottom Cover

• Flip the laptop over and remove all Phillips head screws securing the bottom case. One screw may already be missing.
• Use a plastic pry tool to gently separate the bottom case from the top.
• Carefully lift the cover off and set it aside.

---

Disconnect the Battery

• Locate the battery retention bracket and push it upward to release.
• Unplug the battery to safely disconnect power before continuing with the repair.

---

Disconnect Internal Cables

• Begin on the left side by peeling off the tape covering the Wi-Fi antenna connectors.
• Unplug both Wi-Fi antenna cables and unroute them from under any securing tape.
• Disconnect the LCD display cable. Note that this model does not have a webcam, so no webcam cable is present.

---

Take out the LCD Assembly Screws

• Use your Phillips screwdriver to remove six screws securing the LCD assembly to the chassis—three on each side.
• Carefully open the laptop and pull the top case (keyboard deck) aside to access the LCD area.

---

Remove the LCD Bezel

• Since the corner of the bezel is already loose, start from that access point.
• Use your fingers or a pry tool to gently pop off the bezel around the edges.
• Set the bezel aside to reveal the hinge mount.

---

Remove the Broken Hinge Cover

• Locate the hinge with the broken cover. Use your Phillips screwdriver to remove the four “pancake” screws securing the top hinge.
• If a screw is stuck in a broken standoff, use tweezers or pliers to carefully remove it.

---

Install the New Hinge Cover

• Align the new hinge cover using the two plastic pegs as orientation guides.
• Once aligned, use the included screw to fasten the hinge cover securely in place.

---

Reattach the Bezel

• Lay the screen down flat and align the bezel, starting with either the top or bottom—whichever is easier.
• Snap the bezel all the way around to secure it in place.

---

Reinstall the Top Case

• Take the top case and align it with the hinges, closing the lid carefully to secure the fit.
• Ensure the plastic standoffs align properly.
• Route the display cable correctly under the appropriate bracket before securing.

---

Secure the LCD Assembly Screws

• Reinstall the six Phillips screws—three on each side—that hold the LCD assembly in place.

---

Reconnect Display and Wi-Fi Cables

• Plug in the LCD display cable. It may be a tight fit, so take your time to align and insert it properly.
• Route the Wi-Fi antenna cables back into place and reconnect them.

---

Reconnect the Battery and Reassemble

• Plug the battery back in and push the retention bracket down to secure it.
• Reattach the bottom cover and reinstall all the screws.

---

Power On and Test

• Turn the laptop on and verify that everything functions correctly.
• If the display powers on and there are no issues, the repair was successful.

---

CONCLUSION:

Replacing the hinge on the Asus ROG Zephyrus GA502D can restore the laptop’s structural integrity and prolong its lifespan. With careful disassembly and attention to cable routing, this repair can be completed without damaging internal components. It’s a straightforward fix with the right tools and a little patience. Once reassembled, testing ensures your display functions properly. Now your laptop is ready to get back to work or play!

---

VIDEO TUTORIAL:

Looking for a more in-depth tutorial? Check out our complete teardown video for a detailed step-by-step walkthrough.

---

MAIL-IN REPAIR SERVICE:

We offer professional screen replacement services. If you’re unsure about doing this repair yourself, send your device to our expert technicians for fast and reliable repair.

https://tekdep.com/device-repair/

---

SHOP PARTS:

---

SHOP TOOLS:

Using precision tools ensures a safe and efficient repair. Always use the right tools to prevent damage to delicate components. A quality toolset makes the job smoother and more professional.

---

HAVE QUESTIONS?

We’re here to help! Contact us:

• Phone: 818-456-4479
• Email: [email protected]

---

YOUR EXPERIENCE MATTERS: