🔧 Save on Parts, Devices & Tools. | Get 5% Off Now

Dell Inspiron P119F OLED LCD Replacement – Full Step-by-Step Repair Guide


OVERVIEW:

In this video, we take you through the process of repairing a Dell Inspiron 16.1 by replacing its OLED LCD. The unit was already partially disassembled, so we jump right into the steps needed to replace the screen and reassemble the device. If you’re tackling this repair yourself, we have all the necessary parts and tools available at TechDep. Alternatively, if you prefer to leave it to the professionals, we accept mail-in repairs nationwide.


REPAIR TIME & SKILL LEVEL:

This repair is estimated to take about 1.5-2 hours to complete and is of INTERMEDIATE difficulty, requiring basic knowledge of computer components and careful handling of delicate parts to avoid damage.


STEPS:

Tools You Need

For this repair, you will need a Phillips screwdriver, preferably a small 1.5mm size, to handle screws with precision. You will also need some Flex cable connectors, a retention bar to secure the connectors, and a plastic spudger to assist with prying delicate components without causing damage.


Remove screws and unplug cables

  • First, remove the seven screws that secure the LCD in place.
  • Next, unplug the four Flex cables that are connected to the LCD.
  • These steps are crucial for preparing the unit before removing the old LCD.

Connect the new LCD screen

  • Place the new LCD screen into position, ensuring the connection aligns properly.
  • Be cautious when connecting the main LCD connection as it can fit sideways; improper insertion could damage the pins.
  • Lock the retention bar in place by pushing it down until it snaps into position.

Plug in secondary connections

  • Connect the microphone and webcam cables, as well as the touchscreen Flex cables.
  • These connectors should be inserted carefully to avoid any loose connections after reassembly.

Secure the bracket and connector

  • Place the bracket over the screen to secure it, then plug the final touchscreen connector into place.
  • Close the retention bar on top to secure the connection properly.

Install screws to hold the bracket

  • Using your Phillips screwdriver, tighten the screws on both sides of the bracket to secure the new LCD in place.
  • Ensure these screws are tightly fastened to prevent any loose components later.

Reassemble and secure the hinges

  • Begin by securing the LCD hinges with the screws. There are two screws on the right-hand side and three on the left. Do not use any screws in the other holes as they are intended for the bottom case.
  • Tighten the screws just enough to avoid loosening over time.

Reconnect the battery and bottom case

  • After connecting the battery, carefully line up the bottom case and snap it into place.
  • Secure the captive screws at the bottom of the unit, starting from the center and working your way out to ensure proper alignment.

Final reassembly

  • Once the screws are in place, check that everything is secure and the unit is functioning properly.
  • The LCD replacement process is complete, and the device should now be ready for use.

CONCLUSION:

Replacing the LCD on a Dell Inspiron 16.1 is a straightforward process once you follow these steps. With the right tools and careful attention to detail, you can restore your device to its original condition. Always make sure to double-check connections and screws to ensure everything is tightly secured.


VIDEO TUTORIAL:

Looking for a more in-depth tutorial? Check out our complete teardown video for a detailed step-by-step walkthrough.


MAIL-IN REPAIR SERVICE:

We offer professional screen replacement services. If you’re unsure about doing this repair yourself, send your device to our expert technicians for fast and reliable repair.


SHOP PARTS:


SHOP TOOLS:

Using precision tools ensures a safe and efficient repair. Always use the right tools to prevent damage to delicate components.


HAVE QUESTIONS?

We’re here to help! Contact us:


YOUR EXPERIENCE MATTERS:

Related Posts

iMac 2019 21.5 Repair, A2116 Logic Board Removal, iMac EMC 3195 Upgrade

Complete Teardown & Repair Guide: iMac 21.5-inch 4K (2019) | Model A2116

Inside the 2019 iMac 4K: We strip the A2116 (EMC 3195) down to the screws. Learn the correct way to cut the adhesive, remove the 'Dust Catcher,' and safely extract the Logic Board without damaging the 4K display.

Technician holding a new A3240 Logic Board over a disassembled MacBook Air M4.

The Ultimate Guide to MacBook Air M4 (A3240) Logic Board Replacement

A comprehensive technical guide for replacing the A3240 Logic Board. Covers diagnostics, Touch ID transfer, and critical safety steps for the M4 chip.

Ultimate Guide: MacBook Air M4 (A3240) LCD Screen Replacement & Teardown

Broken screen on your 2025 MacBook Air M4? Don't overpay for repairs. Follow our expert step-by-step teardown guide to replace the A3240 LCD assembly yourself.

Official TEKDEP Tutorials

Subscribe for expert tutorials, pro tech tips, and teardowns.