iPad Pro 12.9″ 3rd Gen Screen Replacement – Revitalize Your iPad Today!

---

OVERVIEW:

Replacing the screen on the iPad Pro 12.9″ (3rd Gen) can be challenging due to the complexity of the device’s construction. This guide walks you through each step of the process, ensuring a safe and effective screen replacement. Follow these instructions carefully to avoid damaging delicate components.

---

REPAIR TIME & SKILL LEVEL:

This repair is estimated to take about 1 to 2 hours to complete and is of MODERATE to advanced difficulty, requiring experience with disassembling Apple devices and handling delicate flex cables.

---

STEPS:

Tools You Need

For this repair, you’ll need a heat gun, plastic opening tools, screwdrivers (Philips head), tweezers, isopropyl alcohol (99%), an X-Acto knife, a smart electric polishing pen, and a blower for dust removal.

---

Heating and Opening the iPad

• Use a heat gun to warm the edges of the display to loosen the adhesive.
• Gently insert plastic opening tools around the edges to separate the screen.
• Slowly lift the display while checking for any still-connected cables.

---

Removing the Screen

• Identify and remove all screws securing the screen’s connections.
• Carefully lift the logic board slightly to access hidden flex cables.
• Disconnect the display and digitizer flex cables from the board.

---

Disconnecting the Battery

• Locate the battery screw and remove it to release tension.
• Ensure that no metal tools make contact with any electrical components.

---

Transferring Face ID Components

• Carefully remove the Face ID assembly from the old screen.
• Use isopropyl alcohol and an X-Acto knife to loosen adhesives.
• Transfer the Face ID flex cable and align it in the new display.

---

Cleaning Old Adhesive

• Peel off old adhesive using tweezers.
• Apply isopropyl alcohol to remove any leftover residue.
• Make sure the surface is completely clean before proceeding.

---

Checking the Frame for Deformations

• Inspect the frame for any bends or separations.
• Use a smart electric polishing pen to smooth out any irregularities.
• Apply light pressure with your thumb to flatten any misaligned areas.

---

Installing the New Screen

• Align the new display connectors with the logic board.
• Carefully press the display flex cable into place.
• Ensure the Face ID flex is positioned properly before securing.

---

Reinstalling Metal Brackets

• Secure all metal brackets over the connections.
• Organize and replace all screws in their correct locations.
• Ensure every bracket is firmly attached to prevent connection issues.

---

Final Assembly and Testing

• Reconnect the battery and secure it with the original screw.
• Ensure the Face ID assembly is properly positioned.
• Power on the iPad to confirm that the display and Face ID function correctly.

---

Securing the Display

• Align the display and press it down firmly so the adhesive sticks.
• Use a blower to remove any dust before final placement.
• Perform a final test to verify the repair’s success.

---

CONCLUSION:

Replacing the screen on an iPad Pro 12.9″ (3rd Gen) requires precision and patience. With the right tools and careful handling, you can successfully complete this repair. If you’re uncertain about any step, consider seeking professional assistance.

---

VIDEO TUTORIAL:

Looking for a more in-depth tutorial? Check out our complete teardown video for a detailed step-by-step walkthrough.

---

MAIL-IN REPAIR SERVICE:

We offer professional screen replacement services. If you’re unsure about doing this repair yourself, send your device to our expert technicians for fast and reliable repair.

https://tekdep.com/device-repair

---

SHOP PARTS:

---

SHOP TOOLS:

Using precision tools ensures a safe and efficient repair. Always use the right tools to prevent damage to delicate components.

---

HAVE QUESTIONS?

For questions or concerns, feel free to reach out to our support team via email or live chat.

• Phone: 818-456-4479
• Email: support@tekdep.com