DIY iPhone 11 Pro Screen Fix – Step-by-Step Replacement Guide!

---

OVERVIEW:

In this repair video, we walk through a full screen replacement on the iPhone 11 Pro. The process focuses on performing the repair quickly and efficiently while maintaining high service quality. Key tips are shared throughout to ensure safe disassembly, prevent screw misplacement, and reduce repair risks—especially for beginners. The technician also highlights proper testing before and after the repair to guarantee customer satisfaction and protect against future issues. Liquid indicators, part grading, and repair documentation are also covered for technician liability.

See the official Apple specs for this model

---

REPAIR TIME & SKILL LEVEL:

This repair is estimated to take about 1 Hour to complete and is of INTERMEDIATE difficulty, requiring careful handling of fragile components and precise screw organization.

---

STEPS:

Tools You Need

For this repair, you’ll need a Pentalobe screwdriver, Tri-point screwdriver (1.5mm), Phillips screwdriver, plastic spudger, guitar pick or pry tool, tweezers, a magnetic screw mat, isopropyl alcohol (optional), and a heat source like a heat gun or mat. Using a precision toolset will help prevent damage to small components.

---

Remove Pentalobe Screws

• Begin the repair by removing the Pentalobe screws at the bottom of the iPhone 11 Pro.
• Use a magnetized screwdriver to help prevent losing the screws.
• It’s highly recommended to place screws on a magnetic mat with grid markings for organization.

---

Start Screen Separation

• Use a pry tool or guitar pick to begin separating the screen, preferably while the screen is powered on.
• Avoid sliding too aggressively; instead, gently “poke, poke, poke” along the edges to prevent additional cracks.
• Slowly lift the screen like a book, with the hinge on the right side (opposite the power button side).

---

Inspect the LCD and Power Off

• Check that the screen still displays properly before turning off the device.
• Look for any yellow, black, or white spots to grade the condition of the screen.
• Once satisfied with the display test, power down the phone completely.

---

Check the Liquid Damage Indicator

• Look inside the phone for the red liquid contact indicator.
• A red indicator means the device has had contact with liquid; this should be documented for liability purposes.
• Take pictures and inform the customer—clarify that your repair warranty only covers the screen.

---

Remove Tri-Point Screws and Disconnect Battery

• Use a 1.5mm Tri-point screwdriver to remove the shield screws covering the battery connector.
• Disconnect the battery first before working on other connectors to avoid short-circuiting the board.
• Press the power button after disconnecting the battery to ensure all charge is discharged.

---

Disconnect Display and Face ID Components

• Remove the display cable, digitizer connector, and Face ID/proximity sensor connector carefully.
• Keep all screws and parts well organized to prevent confusion during reassembly.
• Set the screen aside once fully disconnected and ready for replacement.

---

Remove Earpiece and Sensor Assembly

• Unscrew and remove the earpiece speaker, which contains the Face ID and proximity sensor assembly.
• Keep track of the screw positions—use the magnetic mat’s corner markings (bottom right, top right, top left).
• Apply a tiny bit of isopropyl alcohol and carefully pry up the flex cable without tearing any sensitive parts.

---

Transfer Components to New Screen

• Gently peel off and transfer the Face ID and sensor assembly to the new screen.
• Some replacement screens may come with a dust mesh preinstalled—if not, it will add extra time.
• Check the part quality and glue application from your supplier to reduce install issues and future returns.

---

Reconnect Components and Test

• Before connecting the battery, connect the digitizer, LCD, and sensor assembly to the new screen.
• Install the metal bracket over the connectors and secure it with screws before reconnecting the battery.
• If you’re a beginner, test the screen again before closing the phone fully to ensure all connections are solid.

---

Reassemble the Phone

• Once the screen is tested and functional, close the display panel gently like a book.
• Reinstall the Pentalobe screws at the bottom of the phone to finish the assembly.
• Turn on the device one final time to confirm full screen functionality.

---

CONCLUSION:

This repair covered the full screen replacement of the iPhone 11 Pro with special focus on part safety, technician efficiency, and minimizing mistakes. From removing and transferring critical Face ID components to testing for screen quality and liquid damage, every step aimed to ensure a successful repair. Beginners are advised to take their time, double check all connections, and document any red flags to prevent liability. With careful attention, even a 15-minute repair can lead to professional, customer-ready results.

---

VIDEO TUTORIAL:

Looking for a more in-depth tutorial? Check out our complete teardown video for a detailed step-by-step walkthrough.

---

MAIL-IN REPAIR SERVICE:

Need professional help? Send your device to our expert technicians for a hassle-free screen replacement.

https://tekdep.com/device-repair/

---

SHOP PARTS:

---

SHOP TOOLS:

Using precision tools ensures a safe and efficient repair. Always use the right tools to prevent damage to delicate components.

---

HAVE QUESTIONS?

If you need assistance, feel free to reach out via email or visit our website for expert support.

• Phone: 818-456-4479
• Email: support@tekdep.com

---

YOUR EXPERIENCE MATTERS: